4-HOG Set for 200-gallon storage Vertical Installation

$1,980.00
A set of 4 HOGs plus accessories ready for vertical installation to store 200-gallons (see possible rebates here).  Use with a garden hose.  Includes screen inlet, wall plates for vertical mounting, all connections and a hose-friendly faucet outlet.
.  *ships free to mainland USA.  Please contact info@rainwaterhog.com with details if you are on an island off the mainland or in Hawaii.
YOU WILL NEED to supply the fixings to secure the wall kit to whatever vertical surface you plan to use.  
The Wall Kit is not load-bearing, it simply stabilizes the HOGs.  You will also need a level substrate capable of carrying 440lb/HOG, and a downspout or rain chain to connect your roof to the inlet HOG.
Shop

HORIZONTAL HOG tank

$395.00

HORIZONTAL HOGs cannot use the standard vents and come with only HOG tank and threaded connector. A single HOG does not need a vent. If more than one HOG is connected it must be vented using a closed system such as the ty seal and hard pipe shown in images.

TY SEALS are NOT including with this product. They are available online and from plumbing suppliers.
Shop

Inlet Outlet Kit for Hose SHIPS FREE

$50.00
150-micron steel screen inlet for straining leaves and preventing insects entering the tank.  Reducing elbow and faucet outlet to enable a 3/4 hose threaded to screw on for easy gravity hosing.

INSTALLATION NOTES
  1. Do not use this fitting if you want to pump your rainwater.  Use the pump outlet.
  2. Do not use this fitting if you want an easy all in one DIY winterizing inlet.  Use Graf.
Shop

HOG Wall Kit SHIPS FREE

$48.00
This Kit is designed to secure the HOG to a wall with sturdy steel fittings.  It does not carry the weight of the HOG, but simply secures the HOG in position when it stands vertically.
Plate is 304 grade stainless steel.  All other fixtures in galvanized steel by Unistrut.

INSTALLATION NOTES
  1. Screws for fixing into the wall are NOT provided.  Choose screws and possibly washers to suit the substrate you are working with.  Washers may be necessary to secure the slotted channel.
  2. ​All Wall Kit components are from Unistrut except the proprietary Steel Plate.  If you plan a non-standard installation we can supply plate-only and help you go direct for other components just contact us.
Shop

Inlet/Outlet Kit for Pump SHIPS FREE

$45.00
The INLET is used to filter your water with a physical insect screen mesh when it enters the HOG, and the OUTLET is a ball valve so that you can turn on and off your water flow.  The Ball Valve has a 1" female thread to allow the HOG connector to screw connect.
Shop

Rainwater HOG tank SHIPS FREE*

$390.00

The multi-award-winning flat-walled tank used worldwide for sustainable rainwater collection & reuse.  Architect designed, Made in USA.
​  71" x 20" x 9.5" stores rainwater, drinking water or grey water in any orientation.  An easy 40lb lift.  Designed for DIY installation.
UV stabilized food grade plastic.
HOG tank purchase ncludes air vent and connector parts.

*ships free to mainland USA.  Please contact info@rainwaterhog.com with details if you are on an island off the mainland or in Hawaii.
​
Looking for 200-gallons?  Check out the 4-HOG Complete System.

INSTALLATION NOTES:

Installing vertically? You should use the Steel Wall Kit
Installing 1-3 HOGS?  The Graf all-in-one is the easiest DIY inlet connection
DON'T FORGET your outlet for pumping or using gravity to hose. Both kits have an inlet screen.


Winner Top 10 USA Green Building Product 2008, Spark Design & California Eco Awards 2009
Shop